Oxford

Come With :
– Hitachi X MET 8000 Expert.
– SS316 check sample.
– Battery charger, with UK, US, Euro and Australia plug adapters (charging time: ~8 hours).
– Two Li-ion batteries.
– USB cable.
– USB memory stick containing the User Manual and the Safety Manual (available in 13 languages).
– Light travel stand with safety shield.
– Light radiation shield.
– Background plate.
– Holster and belt.
– WiFi and Bluetooth connectivity.
– Warranty card


Specifications Hitachi Oxford X-MET 8000 Expert :

Analyzer

– EDXRF analyser.
– Large area, high resolution Silicon Drift (SDD) detector.
– Rh target X-ray tube (4 W; 50 kV max., 200 μA max.).
– Automatic 6-position filter changer.
– Measurement spot size: 10.7 mm x 9.4 mm.
– Operating temperature: -10 °C to 50 °C.

Screen and operating system

– 4.3” Blanview touch screen.
– Display resolution: 480 (H) x 800 (V) dots.
– 16 GB internal memory.
– Capable of holding 100,000 results with spectra and images (if camera fitted).
– Bluetooth, WiFi and USB data transfer.
– Graphical user interface available in 13 languages: Chinese traditional and simplified, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Spanish and Russian.


Analytical range

– From Mg to U, up to 35 elements depending on application.

Batteries
– Rechargeable, removable, located inside handle.
– 6.2 Ah Li-ion batteries (Quantity: 2).
– Up to 10-12 hours battery life.
– 110/230 V 50/60 Hz battery charger.

Connectivity ports

– USB 2.0.
– Bluetooth 2.0 (EDR).
– WiFi 802.11 b/g.

PC software (standard)

– Spectrum Display – enables to select analysis condition, collect, view and compare samples spectra.
– Report Generator – enables the creation of customised reports.

Integrated camera (included)

– For accurate positioning of the analyser on the sample.
– Images can be saved, viewed on the X-MET display, and added to reports.
– Magnification: x 6.
– Image size: 640 pixels x 480 pixels.
– Image area on sample: approx. 7.5 mm x 6 mm.
– Camera technology: CMOS.

Optional small-spot collimator

– For accurate measurement of small features such as welds, enabling to isolate the area of interest from surrounding material.
– 3 mm-diameter analysis spot.
– Enable/disable small spot in UI.
– Requires camera to position the X-MET on the sample accurately (camera image will show spot location.

Optional integrated GPS receiver

– Collects and saves location coordinates along with analysis results.
– Accuracy position : 3.0 m CEP with zero interference

Radiation safety

– Password protection.
– Infrared proximity sensor.
– Count rate sensor.
– Fail-safe warning lights.

Storage and transportation

– Waterproof carrying and storage case (TüV tested) for X-MET and accessories.
– Case dimensions: 415 mm (L) x 325 mm (W) x 170 mm (H).
– Neck/shoulder lanyard.
– Wrist strap.
– Holster and belt.

Reliability

– CE and CB approved.
– IP54 rated (NEMA 3 equivalent): splash water and dust proof.
– Tested to MIL-STD-810G for vibration, drop and shock (Method 514.6, Procedure I, Category 4; Method 516.6, Procedures I and IV).
– Registered product: 2 year factory warranty; excludes consumables; 90-day warranty on batteries.
– Optional, replaceable window-shield to protect analytics from sharp and uneven objects and prevent costly repairs.

Hot sample measurement

– Standard maximum sample temperature: 120 ⁰C (248 ⁰F).
– Optional HEROTM window, to measure samples up to 400 ⁰C (752 ⁰F), including light elements. Same analytical performance as with Prolene® window.

Dimensions
– 93 mm (W) x 210 mm (L) x 272 mm (H)

Weight
– 1.3 kg without battery.
– 1.5 kg with battery