TOPCON

Sort By:  
Included: (1)Topcon GX55 3D Control Box, with Automatics Turned on Options enabled, (1)Topcon Single MCR3 with MC2 enabled 900 mhz radio, (1)Topcon PG-A3 Antenna with MC Mount, (1)Topcon PZS-MC mmGPS Sensors, (1)PZS-MC Coil Cable, (1)Topcon PZL-1A mmGPS Laser, (1)Topcon MC2 Sensor, (1)MC2 12ft Coil Cable (pn 9063-1251-12) NEW, (1)Topcon Mast NEW, (1)Topcon Single Antenna Cable, (1) Carry Case.
$7,000.00
Included: Topcon Falcon 8 Aircraft / Drone, Operating license for Falcon 8 inspection features and functionality, Operating license for Falcon 8 survey features and functionality, Mobile ground station, Panasonic Lumix DMC-TZ71 with remote controlled 30x optical zoom (24-720 mm), FLIR TAU 640 Payload (Capable of both RGB and Thermal image capture), Video goggles, ”Fatshark V2”, Independent camera control, Battery charger, 2x LiPo safe bag, 6x batteries, Transport case, Sony Alpha 7R with ZEISS lens (Sonnar T FE 35 mm F/2.8 ZA).
$8,000.00
Included: GLS-2000 Instrument, Carry Case, 4x Batteries and 2x Chargers, Tribrach, Cleaning Kit and Lens Cover, Tooling Kit, SDHC Memory Card, ScanMaster Software.
$6,490.00
Included: 2x Topcon GR-3 Receivers, Base and Rover, Topcon FC-500 Field Controller w/ Magnet GPS Software, Controller Battery and Charger, GR-3 Battery and Chargers (Batteries have been tested an hold a charge), Hard Carry Case, RS232 Power Cable, Antenna, Power Cord, User Manual On CD, Hard Carrying Case.
$3,200.00
Included: Topcon Hiper HR GNSS Base w/Digital UHF II 450-470 MHz Radio, Topcon Hiper HR GNSS Rover w/Digital UHF II 450-470 MHz Radio, 2 Whip Antennae, 2 Dual Bay Chargers, 4 Batteries, USB Cables, External Battery Cable, Manual, Topcon Hard Case, Topcon Tesla Data Collector with Magnet Field Software v. 4.1 with the following modules: Optical, GIS, GPS, Robotics. Charger and Hard Case for Data Collector.
$7,500.00
Included: (2) Topcon Hiper V GPS GNSS Base/Rover Receivers, Internal UHF II 410-470 MHz Rx/Tx Radios, Utilizes GPS, L2C, GLONASS, QZSS, and SBAS Satellites, (1) 12V Power Supply w/ Alligator Clips, (2) Dual Battery Chargers w/ Power Supply, (4) Lithium Ion Batteries, (1) Base Extension Rod, (1) Tribrach, (2) 410-470 MHz Radio Antennas, (1) Serial Data Cable, (1) Topcon Transport Case.
$4,100.00
Included: Topcon Hiper V Receiver, OAF, HiPer V L2 GPS, OAF, HiPer V L2 GLONASS, OAF, HiPer V RTK 10 Hz, Antenna, UHF 440-470 Male BNC, Topnet 40hr Licence Incl Sim card, FC-500 GEO 3G Controller with Pole Bracket, Magnet Field GPS Software, GPS Composite Pole, Topcon Easycare.
$3,800.00
Included: Topcon GTL-1000, Battery, Charger, Power cable, Stylus pen, Lens cap, Lens hood, Tool pouch, Screw driver, Lens brush, Adjusting pin, Hexagonal wrench, Silicon cloth, Quick guide, Startup guide (This sheet), SD card, USB flash drive (Manual), Serial card, Laser caution sign-board, Carrying case, Carrying strap, Export restrictions card.
$8,000.00
Included: Topcon PS-103A Power Station 3" Robotic Total Station 2.4 GHz Radio, Topcon RC-5 Remote Control, Topcon ATP 1 Prism w/ Protective Strap & QTY. 2 Rubber Caps, Topcon CDC68A Battery Charger, Lens Hood For PS-103A, Assorted Tool Kit, QTY. 5 Battery Packs, Power Cord, User Manual On CD-ROM, Hard Carrying Case (G).
$6,000.00
The TOPCON HIPER HR GNSS Base and Rover Kit is a powerful and versatile tool for professionals in surveying, construction, agriculture, and environmental monitoring. Its advanced features, user-friendly design, and exceptional accuracy make it an essential asset for anyone needing precise location data. Whether you are mapping land, planning a construction project, or optimizing agricultural practices, the HIPER HR will help you achieve your goals efficiently and accurately.
$3,300.00
Included: 2x Topcon HiPer V Integrated Receiver Dual GD Digital UHF II 440-470 Base Rover Glonass,  4x Li-Ion Batteries, 1x CD Manual, 1x Topcon Assy, 2x Power Receiver to SAE Cable, 2x EDC113B 115VAC Power Cable for BDC 68/70 Li-Ion Battery, 1x 3M Measuring Tape, 2x UHF 450-470 Male BNC Antenna, 1x Tribrach with Optical Plummet, 1x Plug Adapter, 1x Tribrach Adapter Model -S2, 1x GPS Software CD, Carry Case.
$1,900.00
Brand New Topcon 3D MC2 Machine Control System For Sale (Topcon 3D MC2 )

Topcon 3D MC2 Machine Control System

The Topcon 3D MC2 Machine Control System is a cutting-edge technology that enhances the efficiency and accuracy of construction and excavation projects. This system is designed for heavy machinery operators, providing them with real-time guidance and data to ensure precise work. 


What is the Topcon 3D MC2 Machine Control System?
The Topcon 3D MC2 is a machine control system that helps operators control heavy equipment like excavators, bulldozers, and graders. It uses advanced technology to provide accurate positioning and guidance, allowing operators to work more efficiently and effectively. With this system, operators can achieve precise grading, excavation, and construction tasks, reducing the need for rework and improving project timelines.


How Does the 3D MC2 System Work?
The 3D MC2 system operates using a combination of GPS technology, sensors, and software. Here’s a step-by-step breakdown of how it works:

Step 1: Setting Up the System
Before starting a project, the operator installs the MC2 system on the machine. This involves attaching GPS antennas, sensors, and displays. The system is calibrated to ensure accurate measurements.

Step 2: Creating a 3D Model
Using specialized software, a 3D model of the project site is created. This model includes details about the terrain, elevations, and design specifications. The model serves as a blueprint for the machine to follow.

Step 3: Real-Time Positioning
As the machine operates, the MC2 system continuously receives GPS signals to determine its exact location on the site. This real-time positioning allows the system to compare the machine’s current position with the 3D model.

Step 4: Providing Guidance
The system provides operators with visual guidance on a display inside the cab. It shows whether the machine is above, below, or at the correct grade. This helps operators make quick adjustments while working, ensuring they stay on track.

Step 5: Achieving Precision
With the help of the MC2 system, operators can achieve precise grading and excavation. The system minimizes human error, leading to better results and less material waste.


Key Features of the Topcon 3D MC2
The Topcon 3D MC2 comes with several impressive features that enhance its functionality:

1. Advanced GPS Technology
The system uses high-precision GPS technology to provide accurate positioning. This ensures that operators can work confidently, knowing they are following the correct specifications.

2. User-Friendly Interface
The MC2 system has a simple and intuitive interface. Operators can easily navigate through the system, making it accessible even for those who are not tech-savvy.

3. Real-Time Data
The system provides real-time data and feedback, allowing operators to make immediate adjustments. This helps improve efficiency and reduces the risk of errors.

4. Compatibility with Various Machines
The Topcon 3D MC2 is compatible with a wide range of heavy machinery. Whether you’re using an excavator, dozer, or grader, the system can be adapted to fit your needs.

5. Durability
Designed for tough working conditions, the MC2 system is built to withstand harsh environments. Its rugged design ensures that it remains operational even in challenging weather.


Benefits of Using the Topcon 3D MC2
The Topcon 3D MC2 Machine Control System offers numerous benefits for construction and excavation projects:

1. Increased Efficiency
By providing precise guidance, the MC2 system helps operators complete tasks faster. This leads to improved project timelines and reduced labor costs.

2. Cost Savings
With greater accuracy, there is less material waste. Operators can minimize over-excavation and rework, resulting in significant cost savings for projects.

3. Improved Quality
The precision offered by the MC2 system ensures that work is done correctly the first time. This leads to higher-quality results and fewer mistakes.

4. Enhanced Safety
With real-time data and guidance, operators can work more safely. The system helps prevent accidents and reduces the risk of errors that could lead to injuries.

5. Better Project Management
The ability to track progress in real-time allows project managers to make informed decisions. They can monitor performance and adjust plans as needed, ensuring smoother operations.


Applications of the Topcon 3D MC2
The Topcon 3D MC2 is used in various applications across the construction industry. Here are some common uses:

1. Grading and Excavation
The MC2 system is ideal for grading and excavation tasks. It helps operators achieve the desired slopes and depths, ensuring that sites are prepared accurately.

2. Road Construction
In road construction, the MC2 system provides guidance for laying asphalt and creating smooth surfaces. This ensures that roads are built to specifications and are safe for drivers.

3. Landscaping
The system can also be used in landscaping projects, helping to create beautiful and functional outdoor spaces. It ensures that grading is done correctly for drainage and aesthetics.

4. Site Preparation
Before construction begins, the MC2 system assists in site preparation. It helps clear land, remove debris, and create a level foundation for buildings.

5. Utility Installation
When installing utilities like water and sewer lines, the MC2 system ensures that trenches are dug to the correct depth and alignment. This is crucial for the proper functioning of utility systems.


Why Choose the Topcon 3D MC2?
There are many machine control systems on the market, but the Topcon 3D MC2 stands out for several reasons:

1. Proven Technology
Topcon is a well-respected name in the industry, known for its reliable and innovative technology. The MC2 system is backed by years of research and development.

2. Customer Support
Topcon provides excellent customer support, ensuring that users can get help when they need it. This includes training, troubleshooting, and maintenance assistance.

3. Flexibility
The MC2 system can be customized to fit various machines and project needs. This flexibility makes it a versatile choice for contractors.

4. User Training
Topcon offers training programs to help operators learn how to use the MC2 system effectively. This ensures that users can maximize the benefits of the technology.

5. Future-Ready
The MC2 system is designed to adapt to future advancements in technology. This means that users can stay up-to-date with the latest features and improvements.


Conclusion
The Topcon 3D MC2 Machine Control System is a revolutionary tool for the construction and excavation industry. With its advanced technology, real-time guidance, and user-friendly interface, it helps operators work more efficiently and accurately. Whether you’re grading a site, constructing a road, or preparing land for a new building, the MC2 system ensures that the job is done right.

By choosing the Topcon 3D MC2, contractors can save time and money while improving the quality of their work. As technology continues to evolve, the MC2 system stands out as a reliable and innovative solution for the challenges faced in construction today. If you're involved in construction or excavation, consider how the Topcon 3D MC2 can enhance your projects and make your work easier!

Included: (1)Topcon GX55 3D Control Box, with Automatics Turned on Options enabled, (1)Topcon Single MCR3 with MC2 enabled 900 mhz radio, (1)Topcon PG-A3 Antenna with MC Mount, (1)Topcon PZS-MC mmGPS Sensors, (1)PZS-MC Coil Cable, (1)Topcon PZL-1A mmGPS Laser, (1)Topcon MC2 Sensor, (1)MC2 12ft Coil Cable (pn 9063-1251-12) NEW, (1)Topcon Mast NEW, (1)Topcon Single Antenna Cable, (1) Carry Case.
$7,000.00
Brand New Topcon Falcon 8 UAV InspectionPRO For Sale (Topcon Falcon 8 UAV InspectionPRO)

Topcon Falcon 8 UAV InspectionPRO

The Topcon Falcon 8 UAV is an amazing drone designed for inspections and mapping. This drone is not just a toy; it is a powerful tool used by professionals in many fields. In this article, we will explore what the Falcon 8 is, its features, how it works, and why it is so important for inspections. 


What is a UAV?
First, let’s understand what UAV means. UAV stands for Unmanned Aerial Vehicle. This is just a fancy way to say it’s a drone that can fly without a pilot on board. Instead of having a person flying it, the drone is controlled from the ground using a remote control or a computer. Drones like the Falcon 8 are used for many purposes, including photography, surveying land, and inspecting buildings and structures.


Why Use Drones for Inspections?
Using drones for inspections has many advantages:

  • Safety: Drones can go to places that are dangerous for people, like tall buildings or areas with hazardous materials. This keeps workers safe.
  • Speed: Drones can quickly cover large areas, making inspections faster than traditional methods.
  • Accuracy: Drones can capture high-quality images and data, allowing for detailed inspections.

Key Features of the Topcon Falcon 8
The Topcon Falcon 8 is packed with features that make it one of the best drones for inspections. Let’s take a closer look at some of these features.

1. High-Quality Cameras
The Falcon 8 can be equipped with different types of cameras:

  • RGB Cameras: These are regular cameras that take colorful pictures, just like a smartphone.
  • Thermal Cameras: These cameras can see heat. They are useful for finding problems like leaks in buildings or overheating equipment.
  • Multispectral Cameras: These cameras can capture images in different wavelengths of light, which is great for agriculture and environmental monitoring.

2. Easy to Fly
One of the best things about the Falcon 8 is how easy it is to fly. It has a simple control system that anyone can learn to use. Even if you have never flown a drone before, you can quickly get the hang of it!

3. Modular Design
The Falcon 8 has a modular design, which means you can change its parts easily. If you need a different camera for a specific job, you can swap it out without any hassle. This flexibility makes the Falcon 8 suitable for various tasks.

4. Advanced Technology
The Falcon 8 uses advanced technology to ensure a smooth flight. It has sensors that help it avoid obstacles, making it safer to fly in crowded areas. It also has GPS, which helps it know where it is and where to go.

5. Long Flight Time
This drone can fly for about 30 minutes on a single charge. This is great because it allows you to complete inspections without having to stop and recharge all the time.


How Does the Topcon Falcon 8 Work?
Now that we know what the Falcon 8 is and what features it has, let’s talk about how it works.

Step 1: Planning the Flight
Before flying the drone, the operator plans the flight using special software. This software helps them decide where the drone will fly and what it will look at. It’s like creating a map for the drone to follow!

Step 2: Launching the Drone
Once the flight plan is ready, the operator launches the drone. The Falcon 8 takes off smoothly and starts flying according to the planned route.

Step 3: Capturing Data
As the drone flies, it captures images and data using its cameras. This information is collected in real-time and stored for later analysis. The thermal camera can show heat differences, while the RGB camera captures clear images of the area.

Step 4: Analyzing the Data
After the flight, the data collected by the drone is analyzed using the InspectionPRO software. This software helps users view and interpret the images and data. They can look for problems, create reports, and share findings with others.

Step 5: Making Decisions
With the analyzed data, professionals can make informed decisions. For example, if they find a leak in a building, they can plan repairs quickly. This helps save time and money.


Applications of the Topcon Falcon 8
The Topcon Falcon 8 is used in many different industries. Here are some common applications:

1. Construction Inspections
In construction, the Falcon 8 can inspect buildings and structures to ensure everything is built correctly. It can find issues that need to be fixed before they become bigger problems.

2. Infrastructure Inspections
Drones are used to inspect bridges, power lines, and roads. The Falcon 8 can fly close to these structures and capture detailed images, helping engineers identify any damage or wear.

3. Environmental Monitoring
The Falcon 8 can help monitor the environment by capturing images of forests, rivers, and fields. This information can be used to track changes in the environment and help protect natural resources.

4. Agriculture
Farmers can use the Falcon 8 to monitor crops. The multispectral camera helps them see how healthy their plants are and if they need more water or nutrients.

5. Emergency Response
In emergencies, such as natural disasters, the Falcon 8 can quickly assess damage and help emergency responders plan their actions. It can provide a bird’s-eye view of affected areas, making rescue operations more efficient.


Why Choose the Topcon Falcon 8?
There are many drones out there, but the Topcon Falcon 8 stands out for several reasons:

1. Reliability
The Falcon 8 is known for its reliability. It can handle tough conditions and still perform well. This makes it a trusted choice for professionals.

2. User-Friendly
Even if you are new to flying drones, the Falcon 8 is easy to operate. The controls are simple, and the software is designed for users at all skill levels.

3. Versatility
With its modular design and various camera options, the Falcon 8 can be used for many different tasks. Whether you need it for construction, agriculture, or environmental monitoring, it can adapt to your needs.

4. High-Quality Data
The images and data captured by the Falcon 8 are of high quality. This ensures that professionals have the information they need to make important decisions.


Conclusion
The Topcon Falcon 8 UAV is an incredible tool for inspections and mapping. With its advanced features, ease of use, and versatility, it has become a favorite among professionals in many industries. Whether you are inspecting buildings, monitoring crops, or helping in emergency situations, the Falcon 8 can do it all. Its ability to capture high-quality images and data makes it an essential tool for anyone who needs to inspect or analyze an area from above.

If you’re interested in drones or want to learn more about how they can help in various fields, the Topcon Falcon 8 is a fantastic example of technology that makes our world safer and more efficient!

Included: Topcon Falcon 8 Aircraft / Drone, Operating license for Falcon 8 inspection features and functionality, Operating license for Falcon 8 survey features and functionality, Mobile ground station, Panasonic Lumix DMC-TZ71 with remote controlled 30x optical zoom (24-720 mm), FLIR TAU 640 Payload (Capable of both RGB and Thermal image capture), Video goggles, ”Fatshark V2”, Independent camera control, Battery charger, 2x LiPo safe bag, 6x batteries, Transport case, Sony Alpha 7R with ZEISS lens (Sonnar T FE 35 mm F/2.8 ZA).
$8,000.00
Brand New Topcon GLS-2000S 3D Laser Scanner For Sale (Topcon GLS-2000S 3D Laser Scanner)

Topcon GLS-2000S 3D Laser Scanner

The Topcon GLS-2000S 3D Laser Scanner is a fantastic tool that helps people create detailed 3D models of objects and environments. This technology is used in various fields, including construction, architecture, and surveying. In this guide, we will explore what the Topcon GLS-2000S is, how it works, and why it’s so important for professionals and students alike.


What is a 3D Laser Scanner?
Before we dive into the details of the Topcon GLS-2000S, let’s understand what a 3D laser scanner is. A 3D laser scanner is a device that uses lasers to measure distances and create a three-dimensional representation of an object or space. It captures millions of points of data, which can then be used to create accurate models.


Why Are 3D Laser Scanners Important?
3D laser scanners are important because they help us understand and visualize the world around us. Here are some reasons why they are useful:

  • Accuracy: They provide precise measurements, which are essential in fields like construction and surveying.
  • Speed: Laser scanners can capture data quickly, saving time compared to traditional measuring methods.
  • Visualization: The 3D models created can help people see things more clearly, making it easier to plan and design projects.

Overview of the Topcon GLS-2000S
The Topcon GLS-2000S is a state-of-the-art 3D laser scanner designed for professionals who need high-quality data. Let’s look at some of its key features.

High-Resolution Scanning
One of the standout features of the Topcon GLS-2000S is its ability to capture high-resolution scans. It can gather millions of data points in a short amount of time, creating incredibly detailed models. This is especially useful for projects that require a lot of detail, such as historical site documentation or complex architectural designs.

Fast Scanning Speed
The GLS-2000S is designed for speed. It can complete a full scan in just a few minutes. This means that surveyors and engineers can gather the data they need quickly, allowing them to move on to the next phase of their projects without wasting time.

User-Friendly Interface
Even though the technology behind the GLS-2000S is advanced, it is designed to be easy to use. The interface is intuitive, which means that even someone who is not a tech expert can operate it. This is especially helpful for new users or students who are just starting to learn about 3D scanning.

Versatility
The Topcon GLS-2000S is versatile and can be used in various applications. Whether you’re scanning buildings, landscapes, or even small objects, this scanner can handle it all. Its adaptability makes it a valuable tool for many different industries.

Portable Design
The GLS-2000S is designed to be portable, making it easy to transport from one location to another. This is particularly important for fieldwork, where surveyors and engineers often need to move around to gather data from different sites.


Specifications of the Topcon GLS-2000S
Let’s take a closer look at some of the specifications that make the Topcon GLS-2000S stand out:

  • Scanning Range: The GLS-2000S can scan objects at distances of up to 200 meters, making it suitable for both small and large projects.
  • Point Cloud Density: It offers high point cloud density, capturing millions of points per second, which results in detailed and accurate models.
  • Battery Life: The device has a long-lasting battery, allowing it to operate for extended periods without needing a recharge. This is crucial for long days in the field.
  • Data Formats: The GLS-2000S can export data in various formats, making it compatible with many software programs used in surveying and design.

Applications of the Topcon GLS-2000S
The Topcon GLS-2000S is used in various fields. Here are some of the main applications:

Construction
In construction, the GLS-2000S helps builders and engineers create accurate models of buildings and structures. This allows them to plan and design projects more effectively, reducing errors and improving efficiency.

Architecture
Architects use the Topcon GLS-2000S to capture the details of buildings and landscapes. This data helps them create stunning visualizations and designs that meet the needs of their clients.

Surveying
Surveyors rely on the GLS-2000S to gather accurate data about land and property boundaries. The high-resolution scans provide precise measurements, which are essential for creating maps and conducting land surveys.

Cultural Heritage Preservation
The GLS-2000S is also used in cultural heritage preservation. It can capture detailed scans of historical sites and artifacts, helping to document and preserve them for future generations. This is important for maintaining our history and culture.


Benefits of Using the Topcon GLS-2000S
Using the Topcon GLS-2000S comes with several benefits:

Increased Efficiency
With its fast scanning speed and high-resolution capabilities, the GLS-2000S allows users to complete their tasks more quickly. This means more work can be done in less time, which is especially valuable in fast-paced industries.

Enhanced Accuracy
The ability to capture millions of data points ensures that users get the most accurate readings possible. This is crucial for tasks that require precision, such as surveying and construction.

Easy Data Integration
The GLS-2000S can export data in various formats, making it easy to integrate with other software programs. This helps teams work together more effectively, as everyone can access the same information.

Durable and Reliable
The robust design of the GLS-2000S means it can withstand tough conditions in the field. Users can rely on it to perform well, no matter the environment.


How to Use the Topcon GLS-2000S
Using the Topcon GLS-2000S is straightforward. Here’s a simple guide on how to get started:

1. Setting Up the Scanner
First, you need to set up the scanner. Choose a stable location where the scanner can capture data without obstructions. Once you set it up, turn it on and connect it to power if needed.

2. Selecting Scan Settings
Next, select the scan settings. You can adjust parameters such as scan resolution and range based on your project needs. The user-friendly interface makes this step easy.

3. Starting the Scan
Once everything is set up, you can start the scan. The GLS-2000S will begin capturing data, and you can monitor the process through the interface. It will collect millions of points to create a detailed 3D model.

4. Reviewing the Data
After the scan is complete, you can review the data on the scanner or transfer it to a computer. This allows you to check for any missing information or areas that need to be rescanned.

5. Analyzing and Exporting Data
Finally, analyze the scanned data and export it in your desired format. You can use various software programs to create detailed models, maps, or reports based on the data collected.


Conclusion
The Topcon GLS-2000S 3D Laser Scanner is a powerful tool that provides accurate and detailed measurements for various applications. Its advanced technology, user-friendly design, and ability to capture high-resolution scans make it an essential device for professionals in construction, architecture, surveying, and cultural heritage preservation.

If you’re interested in technology, engineering, or art, understanding tools like the Topcon GLS-2000S can help you appreciate the innovations that make these fields work. With the right equipment, the possibilities for creativity and accuracy are endless!

Included: GLS-2000 Instrument, Carry Case, 4x Batteries and 2x Chargers, Tribrach, Cleaning Kit and Lens Cover, Tooling Kit, SDHC Memory Card, ScanMaster Software.
$6,490.00
Brand NEW Topcon GR-3 Base & Rover Kit UHF Modem For Sale (Topcon GR-3 Base & Rover Kit UHF Modem)

Topcon GR-3 Base & Rover Kit UHF Modem

The Topcon GR-3 Base & Rover Kit UHF Modem is an incredible tool that helps people measure land accurately. This kit is widely used by surveyors, engineers, and farmers to ensure they know exactly where things are located. In this guide, we will explore what the Topcon GR-3 is, how it works, and why it’s so important in various fields.


What is GNSS?
Before we dive into the details of the Topcon GR-3, let’s understand what GNSS means. GNSS stands for Global Navigation Satellite System. It’s a system that uses satellites in space to help us find out where we are on Earth. Just like how your smartphone can tell you your location using GPS, GNSS does the same but with even more satellites, making it more accurate.


Why is GNSS Important?
GNSS is important because it helps in many areas of our lives. Here are a few examples:

  • Navigation: People use it for driving directions or finding places.
  • Surveying: Surveyors need to measure land accurately for construction, roads, and buildings.
  • Agriculture: Farmers use GNSS to plant seeds and manage crops more efficiently.

Overview of the Topcon GR-3

The Topcon GR-3 is a special type of GNSS receiver that helps users get precise measurements for various tasks. Let’s break down its features so you can understand why it’s so useful.

Multi-Constellation Support
One of the coolest features of the Topcon GR-3 is that it can connect to multiple satellite systems. It doesn’t just rely on one system like GPS; it can also use GLONASS, Galileo, and BeiDou. This means it can find your location even better, especially in tricky places like cities with tall buildings.

UHF Modem
The Topcon GR-3 comes with a UHF modem. This modem allows the base station to communicate with the rover unit over radio waves. This is important because it helps send data back and forth without needing cables. The UHF modem is especially useful for long distances, making it easier to work in large areas.

Compact Design
The GR-3 is designed to be lightweight and portable. This makes it easy for surveyors and engineers to carry it around. They can take it to different locations without any hassle. Its compact size also means it can fit into small spaces, which is great for surveying in tight areas.

Robust Performance
When you’re out in the field, conditions can change. The Topcon GR-3 is built to perform well even in difficult environments. Whether it’s a sunny day or cloudy weather, this device can still give you accurate readings. It works well in places with lots of trees or buildings, where signals might get blocked.

User-Friendly Interface
Even though the technology behind the GR-3 is advanced, it’s designed to be easy to use. The interface is intuitive, which means that even someone who is not a tech expert can operate it. This is especially helpful for new users or those who are just starting in surveying.


Specifications of the Topcon GR-3
Let’s take a closer look at some of the specifications that make the Topcon GR-3 stand out:

  • Frequency Bands: It operates on multiple frequency bands, including L1, L2, and L5. This allows it to communicate with different satellite systems.
  • Accuracy: In real-time kinematic (RTK) mode, the GR-3 can achieve accuracy within a few centimeters. This is crucial for tasks that require precise measurements.
  • Battery Life: The device has a long-lasting battery, which means it can be used for extended periods without needing to recharge. This is important for long days in the field.
  • Data Logging: The GR-3 can log data for later use. This means that if you need to analyze the measurements later, you can do so easily.

Applications of the Topcon GR-3
The Topcon GR-3 is used in various fields. Here are some of the main applications:

Land Surveying
Surveyors use the GR-3 to measure land accurately. They need precise data to create maps, determine property boundaries, and plan construction projects. With the GR-3, they can get accurate measurements quickly, making their job easier and more efficient.

Construction
In construction, knowing the exact location of structures is crucial. The Topcon GR-3 helps builders and engineers ensure that everything is placed correctly. This reduces errors and helps projects stay on schedule.

Agriculture
Farmers are using technology more than ever, and the Topcon GR-3 is no exception. It helps them manage their fields by providing accurate data on where to plant crops. This leads to better yields and more efficient use of resources.

Environmental Monitoring
The GR-3 can also be used for environmental monitoring. This includes measuring changes in land use, tracking deforestation, or monitoring water levels in rivers and lakes. By providing accurate data, it helps researchers and environmentalists make informed decisions.


Benefits of Using the Topcon GR-3
Using the Topcon GR-3 comes with several benefits:

Increased Efficiency
With its advanced technology and fast processing, the GR-3 allows users to complete their tasks more quickly. This means more work can be done in less time.

Enhanced Accuracy
The ability to connect to multiple satellite systems ensures that users get the most accurate readings possible. This is especially important in fields like surveying and construction.

Easy Data Sharing
The UHF modem allows for easy data sharing between the base and rover units. This helps teams work together more effectively, as everyone can access the same information.

Durable and Reliable
The robust design of the GR-3 means it can withstand tough conditions in the field. Users can rely on it to perform well, no matter the environment.


How to Use the Topcon GR-3
Using the Topcon GR-3 is straightforward. Here’s a simple guide on how to get started:

1. Setting Up the Base Station
First, you need to set up the base station. This is the stationary part of the kit that communicates with the rover. Choose a clear location where the base can receive signals from satellites. Once you set it up, turn it on and connect it to power.

2. Preparing the Rover
Next, prepare the rover unit. This is the part you will carry around to take measurements. Make sure it’s charged and ready to go. You can connect it to your tablet or computer using Bluetooth or the UHF modem.

3. Calibration
Before starting your measurements, you need to calibrate both the base and rover units. This ensures they are communicating correctly. Follow the instructions in the user manual to complete this step.

4. Taking Measurements
Once everything is set up and calibrated, you can start taking measurements. Move the rover to different points in the area you want to survey. The GR-3 will provide real-time data on your location, allowing you to record accurate measurements.

5. Analyzing Data
After you finish collecting data, you can analyze it on your computer or tablet. This will help you create maps, reports, or any other necessary documentation.


Conclusion
The Topcon GR-3 Base & Rover Kit UHF Modem is a powerful tool that provides accurate measurements for various applications. Its advanced technology, user-friendly design, and ability to connect to multiple satellite systems make it an essential device for surveyors, engineers, and farmers. By using the Topcon GR-3, professionals can work more efficiently and accurately, ensuring that their projects are successful.

Included: 2x Topcon GR-3 Receivers, Base and Rover, Topcon FC-500 Field Controller w/ Magnet GPS Software, Controller Battery and Charger, GR-3 Battery and Chargers (Batteries have been tested an hold a charge), Hard Carry Case, RS232 Power Cable, Antenna, Power Cord, User Manual On CD, Hard Carrying Case.
$3,200.00
Brand New Topcon Hiper HR GNSS Base and Rover Kit For Sale (Topcon Hiper HR GNSS Base and Rover Kit)

Topcon Hiper HR GNSS Base and Rover Kit

The Topcon Hiper HR GNSS Base and Rover Kit is an amazing tool that helps people measure land and locations with great accuracy. This kit is used by surveyors, engineers, and even farmers to ensure they know exactly where things are. In this guide, we will explore what the Topcon Hiper HR is, how it works, and why it’s so important in various fields.


What is GNSS?
Before we dive into the details of the Topcon Hiper HR, let’s understand what GNSS means. GNSS stands for Global Navigation Satellite System. It’s a system that uses satellites in space to help us find out where we are on Earth. Just like how your smartphone can tell you your location using GPS, GNSS does the same but with even more satellites, making it more accurate.


Why is GNSS Important?
GNSS is important because it helps in many areas of our lives. Here are a few examples:

  • Navigation: People use it for driving directions or finding places.
  • Surveying: Surveyors need to measure land accurately for construction, roads, and buildings.
  • Agriculture: Farmers use GNSS to plant seeds and manage crops more efficiently.

Overview of the Topcon Hiper HR

The Topcon Hiper HR is a special kind of GNSS receiver. It helps users get precise measurements for various tasks. Let’s break down its features so you can understand why it’s so useful.

Multi-Constellation Support
One of the coolest features of the Topcon Hiper HR is that it can connect to multiple satellite systems. It doesn’t just rely on one system like GPS; it can also use GLONASS, Galileo, and BeiDou. This means it can find your location even better, especially in tricky places like cities with tall buildings.

Advanced Technology
The Hiper HR uses advanced technology to ensure it provides accurate readings. It has built-in algorithms that help it process signals from satellites quickly. This means you get your location data faster and more accurately.

Compact Design
The Hiper HR is designed to be lightweight and portable. This makes it easy for surveyors and engineers to carry it around. They can take it to different locations without any hassle. Its compact size also means it can fit into small spaces, which is great for surveying in tight areas.

Robust Performance
When you’re out in the field, conditions can change. The Topcon Hiper HR is built to perform well even in difficult environments. Whether it’s a sunny day or cloudy weather, this device can still give you accurate readings. It works well in places with lots of trees or buildings, where signals might get blocked.

Integrated Communication
The Topcon Hiper HR has various ways to communicate. It can connect through UHF radio, Bluetooth, and Wi-Fi. This means that data can be transferred easily between the device and other equipment. For example, surveyors can send their measurements to a computer or a tablet without needing cables.

User-Friendly Interface
Even though the technology behind the Hiper HR is advanced, it’s designed to be easy to use. The interface is intuitive, which means that even someone who is not a tech expert can operate it. This is especially helpful for new users or those who are just starting in surveying.


Specifications of the Topcon Hiper HR
Let’s take a closer look at some of the specifications that make the Topcon Hiper HR stand out:

  • Frequency Bands: It operates on multiple frequency bands, including L1, L2, and L5. This allows it to communicate with different satellite systems.
  • Accuracy: In real-time kinematic (RTK) mode, the Hiper HR can achieve accuracy within a few centimeters. This is crucial for tasks that require precise measurements.
  • Battery Life: The device has a long-lasting battery, which means it can be used for extended periods without needing to recharge. This is important for long days in the field.
  • Data Logging: The Hiper HR can log data for later use. This means that if you need to analyze the measurements later, you can do so easily.

Applications of the Topcon Hiper HR
The Topcon Hiper HR is used in various fields. Here are some of the main applications:

Land Surveying
Surveyors use the Hiper HR to measure land accurately. They need precise data to create maps, determine property boundaries, and plan construction projects. With the Hiper HR, they can get accurate measurements quickly, making their job easier and more efficient.

Construction
In construction, knowing the exact location of structures is crucial. The Topcon Hiper HR helps builders and engineers ensure that everything is placed correctly. This reduces errors and helps projects stay on schedule.

Agriculture
Farmers are using technology more than ever, and the Topcon Hiper HR is no exception. It helps them manage their fields by providing accurate data on where to plant crops. This leads to better yields and more efficient use of resources.

Environmental Monitoring
The Hiper HR can also be used for environmental monitoring. This includes measuring changes in land use, tracking deforestation, or monitoring water levels in rivers and lakes. By providing accurate data, it helps researchers and environmentalists make informed decisions.


Benefits of Using the Topcon Hiper HR
Using the Topcon Hiper HR comes with several benefits:

Increased Efficiency
With its advanced technology and fast processing, the Hiper HR allows users to complete their tasks more quickly. This means more work can be done in less time.

Enhanced Accuracy
The ability to connect to multiple satellite systems ensures that users get the most accurate readings possible. This is especially important in fields like surveying and construction.

Easy Data Sharing
The integrated communication features make it easy to share data with other devices. This helps teams work together more effectively, as everyone can access the same information.

Durable and Reliable
The robust design of the Hiper HR means it can withstand tough conditions in the field. Users can rely on it to perform well, no matter the environment.


How to Use the Topcon Hiper HR
Using the Topcon Hiper HR is straightforward. Here’s a simple guide on how to get started:

1. Setting Up the Base Station
First, you need to set up the base station. This is the stationary part of the kit that communicates with the rover. Choose a clear location where the base can receive signals from satellites. Once you set it up, turn it on and connect it to power.

2. Preparing the Rover
Next, prepare the rover unit. This is the part you will carry around to take measurements. Make sure it’s charged and ready to go. You can connect it to your tablet or computer using Bluetooth or Wi-Fi.

3. Calibration
Before starting your measurements, you need to calibrate both the base and rover units. This ensures they are communicating correctly. Follow the instructions in the user manual to complete this step.

4. Taking Measurements
Once everything is set up and calibrated, you can start taking measurements. Move the rover to different points in the area you want to survey. The Hiper HR will provide real-time data on your location, allowing you to record accurate measurements.

5. Analyzing Data
After you finish collecting data, you can analyze it on your computer or tablet. This will help you create maps, reports, or any other necessary documentation.


Conclusion
The Topcon Hiper HR GNSS Base and Rover Kit is a powerful tool that provides accurate measurements for various applications. Its advanced technology, user-friendly design, and ability to connect to multiple satellite systems make it an essential device for surveyors, engineers, and farmers. By using the Topcon Hiper HR, professionals can work more efficiently and accurately, ensuring that their projects are successful.

If you’re interested in surveying, construction, or agriculture, understanding tools like the Topcon Hiper HR can help you appreciate the technology that makes these fields work. With the right equipment, the possibilities are endless!

Included: Topcon Hiper HR GNSS Base w/Digital UHF II 450-470 MHz Radio, Topcon Hiper HR GNSS Rover w/Digital UHF II 450-470 MHz Radio, 2 Whip Antennae, 2 Dual Bay Chargers, 4 Batteries, USB Cables, External Battery Cable, Manual, Topcon Hard Case, Topcon Tesla Data Collector with Magnet Field Software v. 4.1 with the following modules: Optical, GIS, GPS, Robotics. Charger and Hard Case for Data Collector.
$7,500.00
Brand New Topcon Hiper V GNSS Base and Rover Kit For Sale (Topcon Hiper V GNSS Base and Rover Kit)

Topcon Hiper V GNSS Base and Rover Kit

The Topcon Hiper V GNSS Base and Rover Kit is an incredible tool that helps people measure land and locations accurately. This kit is used by surveyors, engineers, and even farmers to make sure they know exactly where things are. In this guide, we will explore what the Topcon Hiper V is, how it works, and why it’s so important in various fields.


What is GNSS?
Before we dive into the details of the Topcon Hiper V, let’s understand what GNSS means. GNSS stands for Global Navigation Satellite System. It’s a system that uses satellites in space to help us find out where we are on Earth. Just like how your smartphone can tell you your location using GPS, GNSS does the same but with even more satellites, making it more accurate.


Why is GNSS Important?
GNSS is important because it helps in many areas of our lives. Here are a few examples:

  • Navigation: People use it for driving directions or finding places.
  • Surveying: Surveyors need to measure land accurately for construction, roads, and buildings.
  • Agriculture: Farmers use GNSS to plant seeds and manage crops more efficiently.

Overview of the Topcon Hiper V

The Topcon Hiper V is a special kind of GNSS receiver. It helps users get precise measurements for various tasks. Let’s break down its features so you can understand why it’s so useful.

Multi-Constellation Support
One of the coolest features of the Topcon Hiper V is that it can connect to multiple satellite systems. It doesn’t just rely on one system like GPS; it can also use GLONASS, Galileo, and BeiDou. This means it can find your location even better, especially in tricky places like cities with tall buildings.

Advanced Technology
The Hiper V uses advanced technology to ensure it provides accurate readings. It has built-in algorithms that help it process signals from satellites quickly. This means you get your location data faster and more accurately.

Compact Design
The Hiper V is designed to be lightweight and portable. This makes it easy for surveyors and engineers to carry it around. They can take it to different locations without any hassle. Its compact size also means it can fit into small spaces, which is great for surveying in tight areas.

Robust Performance
When you’re out in the field, conditions can change. The Topcon Hiper V is built to perform well even in difficult environments. Whether it’s a sunny day or cloudy weather, this device can still give you accurate readings. It works well in places with lots of trees or buildings, where signals might get blocked.

Integrated Communication
The Topcon Hiper V has various ways to communicate. It can connect through UHF radio, Bluetooth, and Wi-Fi. This means that data can be transferred easily between the device and other equipment. For example, surveyors can send their measurements to a computer or a tablet without needing cables.

User-Friendly Interface
Even though the technology behind the Hiper V is advanced, it’s designed to be easy to use. The interface is intuitive, which means that even someone who is not a tech expert can operate it. This is especially helpful for new users or those who are just starting in surveying.


Specifications of the Topcon Hiper V
Let’s take a closer look at some of the specifications that make the Topcon Hiper V stand out:

  • Frequency Bands: It operates on multiple frequency bands, including L1, L2, and L5. This allows it to communicate with different satellite systems.
  • Accuracy: In real-time kinematic (RTK) mode, the Hiper V can achieve accuracy within a few centimeters. This is crucial for tasks that require precise measurements.
  • Battery Life: The device has a long-lasting battery, which means it can be used for extended periods without needing to recharge. This is important for long days in the field.
  • Data Logging: The Hiper V can log data for later use. This means that if you need to analyze the measurements later, you can do so easily.

Applications of the Topcon Hiper V
The Topcon Hiper V is used in various fields. Here are some of the main applications:

Land Surveying
Surveyors use the Hiper V to measure land accurately. They need precise data to create maps, determine property boundaries, and plan construction projects. With the Hiper V, they can get accurate measurements quickly, making their job easier and more efficient.

Construction
In construction, knowing the exact location of structures is crucial. The Topcon Hiper V helps builders and engineers ensure that everything is placed correctly. This reduces errors and helps projects stay on schedule.

Agriculture
Farmers are using technology more than ever, and the Topcon Hiper V is no exception. It helps them manage their fields by providing accurate data on where to plant crops. This leads to better yields and more efficient use of resources.


Benefits of Using the Topcon Hiper V
Using the Topcon Hiper V comes with several benefits:

Increased Efficiency
With its advanced technology and fast processing, the Hiper V allows users to complete their tasks more quickly. This means more work can be done in less time.

Enhanced Accuracy
The ability to connect to multiple satellite systems ensures that users get the most accurate readings possible. This is especially important in fields like surveying and construction.

Easy Data Sharing
The integrated communication features make it easy to share data with other devices. This helps teams work together more effectively, as everyone can access the same information.

Durable and Reliable
The robust design of the Hiper V means it can withstand tough conditions in the field. Users can rely on it to perform well, no matter the environment.


Conclusion
The Topcon Hiper V GNSS Base and Rover Kit is a powerful tool that provides accurate measurements for various applications. Its advanced technology, user-friendly design, and ability to connect to multiple satellite systems make it an essential device for surveyors, engineers, and farmers. By using the Topcon Hiper V, professionals can work more efficiently and accurately, ensuring that their projects are successful.

If you’re interested in surveying, construction, or agriculture, understanding tools like the Topcon Hiper V can help you appreciate the technology that makes these fields work. With the right equipment, the possibilities are endless!

Included: (2) Topcon Hiper V GPS GNSS Base/Rover Receivers, Internal UHF II 410-470 MHz Rx/Tx Radios, Utilizes GPS, L2C, GLONASS, QZSS, and SBAS Satellites, (1) 12V Power Supply w/ Alligator Clips, (2) Dual Battery Chargers w/ Power Supply, (4) Lithium Ion Batteries, (1) Base Extension Rod, (1) Tribrach, (2) 410-470 MHz Radio Antennas, (1) Serial Data Cable, (1) Topcon Transport Case.
$4,100.00
Brand New Topcon Hiper V Rover GD UHF II For Sale (Topcon Hiper V Rover GD UHF II)

Topcon Hiper V Rover GD UHF II: The Ultimate GNSS Solution

The Topcon Hiper V Rover GD UHF II is a cutting-edge GNSS (Global Navigation Satellite System) receiver designed for high-precision surveying and mapping applications. This device is known for its accuracy, reliability, and versatility, making it an essential tool for professionals in fields such as construction, land surveying, and agriculture. In this article, we will explore what the Topcon Hiper V Rover GD UHF II is, how it works, its features, applications, and why it stands out in the world of GNSS technology.


What is GNSS?
GNSS refers to a system that uses satellites to provide geolocation and time information to a GNSS receiver anywhere on Earth. This technology enables users to determine their precise location, which is crucial for various applications, including surveying, navigation, and mapping.


How Does GNSS Work?
GNSS works by using a network of satellites that orbit the Earth. These satellites transmit signals to GNSS receivers, which calculate their position based on the time it takes for the signals to reach them. The more satellites the receiver can connect to, the more accurate the position calculation will be.


Introducing the Topcon Hiper V Rover GD UHF II
The Topcon Hiper V Rover GD UHF II is a powerful GNSS receiver that offers advanced features for high-precision positioning. It is designed for both static and dynamic applications, making it suitable for various surveying tasks. Let’s take a closer look at its key features and benefits.


Key Features of the Topcon Hiper V Rover GD UHF II

  • High Precision: The Hiper V Rover provides centimeter-level accuracy, making it ideal for applications that require precise measurements, such as land surveying and construction layout.
  • Multi-Constellation Support: This device supports multiple GNSS constellations, including GPS, GLONASS, Galileo, and BeiDou. This capability enhances the receiver's performance and reliability by allowing it to utilize signals from various satellite systems.
  • UHF Radio Communication: The Hiper V Rover GD UHF II features built-in UHF radio communication, enabling real-time corrections for enhanced accuracy. This is particularly useful for applications that require immediate data processing.
  • Rugged Design: Built to withstand harsh environmental conditions, the Hiper V Rover is durable and weather-resistant. Its rugged construction ensures reliable performance in challenging outdoor settings.
  • User-Friendly Interface: The device features an intuitive interface with a clear display, making it easy for users to navigate settings and monitor performance. This design reduces the learning curve for new operators.
  • Long Battery Life: The Hiper V Rover is equipped with a long-lasting battery, allowing for extended use in the field without the need for frequent recharging.
  • Integrated Software: The device comes with integrated software that facilitates data collection, processing, and analysis. This software streamlines workflows and enhances productivity.

Components of the Hiper V Rover GD UHF II Kit
The Topcon Hiper V Rover GD UHF II typically includes several essential components:

1. GNSS Receiver Unit
The main part of the kit, the GNSS receiver unit, contains all the technology needed to receive satellite signals and calculate precise positions.

2. Controller
A handheld controller allows users to communicate with the GNSS receiver. It provides access to various functions and real-time monitoring of data collection.

3. Tripod
A sturdy tripod is essential for stabilizing the GNSS receiver during measurements. It ensures that the device remains level and secure, which is important for accurate results.

4. Accessories
The kit may also include various accessories such as:

  • Batteries: Extra batteries to ensure you can work for long periods without interruption.
  • Chargers: To keep your devices powered up and ready to use.
  • Carrying Case: A protective case for transporting the Hiper V Rover safely.

Applications of the Topcon Hiper V Rover GD UHF II
The Topcon Hiper V Rover GD UHF II is versatile and can be used in many different fields. Here are some common applications:

1. Land Surveying
Surveyors use the Hiper V Rover to measure land accurately. This is essential for determining property boundaries, creating topographic maps, and assessing land for development.

2. Construction
In construction, the Hiper V Rover is used for layout and site management. It ensures that structures are built according to specifications and helps monitor progress on-site.

3. Agriculture
Farmers and agricultural professionals use the Hiper V Rover for precision farming. It helps optimize planting, irrigation, and harvesting processes, leading to improved crop yields.

4. Mining and Excavation
The Hiper V Rover is used in mining operations to measure and map excavation sites. It helps ensure that operations are conducted safely and effectively.

5. Environmental Monitoring
Researchers use the Hiper V Rover for environmental monitoring and analysis. It helps collect data on land use, vegetation, and other ecological factors, which is important for conservation efforts.


Benefits of Using the Topcon Hiper V Rover GD UHF II
The Topcon Hiper V Rover GD UHF II offers several benefits that make it a valuable tool for professionals:

1. Enhanced Efficiency
With its fast data collection capabilities, the Hiper V Rover allows surveyors to work more efficiently. This speed helps teams complete projects on time and reduces downtime in the field.

2. Improved Accuracy
The high precision of the Hiper V Rover ensures that measurements are reliable. This accuracy is crucial for projects that require exact data, such as construction and land surveying.

3. Versatility
The Hiper V Rover can be used in various applications, making it a valuable tool for many professionals. Its multi-constellation support allows users to benefit from signals from different satellite systems.

4. User-Friendly Design
The intuitive interface and clear display make the Hiper V Rover easy to operate. Even those who are new to GNSS technology can quickly learn how to use it, which helps reduce training time.

5. Durability
The rugged construction of the Hiper V Rover ensures that it can withstand tough working conditions. This durability means that users can rely on the instrument for consistent performance in the field.


How to Use the Topcon Hiper V Rover GD UHF II
Using the Topcon Hiper V Rover GD UHF II is straightforward. Here’s a step-by-step guide:

Step 1: Set Up the GNSS Receiver
Place the GNSS receiver on a stable tripod in a clear area with a good view of the sky.
Connect it to a power source and turn it on.

Step 2: Prepare the Controller
Turn on the handheld controller and connect it to the GNSS receiver.
Set up the controller to communicate with the GNSS receiver for real-time data collection.

Step 3: Start Collecting Data
Move to the points you want to measure. The GNSS receiver will capture data as you move around the area.
Follow the instructions on the controller’s display to start and stop measurements.

Step 4: Analyze the Data
Once you have collected all the necessary data, you can process it using the integrated software.
This analysis will help you create maps, reports, or other outputs based on your measurements.


Conclusion
In conclusion, the Topcon Hiper V Rover GD UHF II is a powerful and versatile GNSS receiver that is essential for professionals in surveying, construction, agriculture, and environmental monitoring. Its advanced features, high precision, and user-friendly design make it an invaluable tool for accurate data collection and efficient workflows. Whether you are measuring land, managing construction projects, or optimizing agricultural practices, the Hiper V Rover will help you achieve your goals with confidence.

Included: Topcon Hiper V Receiver, OAF, HiPer V L2 GPS, OAF, HiPer V L2 GLONASS, OAF, HiPer V RTK 10 Hz, Antenna, UHF 440-470 Male BNC, Topnet 40hr Licence Incl Sim card, FC-500 GEO 3G Controller with Pole Bracket, Magnet Field GPS Software, GPS Composite Pole, Topcon Easycare.
$3,800.00
Topcon GTL-1000 Scanning For Sale (Topcon GTL-1000 Scanning)

Topcon GTL-1000 Scanning: The Future of 3D Measurement

The Topcon GTL-1000 is a revolutionary tool in the world of surveying and construction. It combines advanced technology with user-friendly features to create a powerful 3D scanning solution. This device is designed to help professionals measure and capture detailed information about structures and landscapes quickly and accurately. In this article, we will explore what the Topcon GTL-1000 is, how it works, its features, applications, and why it is so important.


What is 3D Scanning?
3D scanning is a technology that captures the shape and appearance of physical objects or environments. It creates a digital model that represents the object in three dimensions. This is done by using lasers or cameras to take measurements from different angles. The result is a detailed and accurate representation that can be used for various purposes, such as designing buildings, analyzing landscapes, or preserving historical sites.


How Does 3D Scanning Work?
The process of 3D scanning involves several steps:

  • Setup: The scanning device is placed in a location where it can see the object or area being scanned.
  • Scanning: The device sends out laser beams or uses cameras to capture data about the object’s shape and size. This data is collected from multiple angles to ensure accuracy.
  • Data Processing: The collected data is processed using specialized software to create a 3D model. This model can then be viewed, edited, and analyzed on a computer.

Introducing the Topcon GTL-1000

The Topcon GTL-1000 is a state-of-the-art 3D scanning solution designed for professionals in surveying, construction, and engineering. It offers a unique combination of features that make it an essential tool for anyone who needs accurate measurements and detailed data. Let’s take a closer look at what makes the GTL-1000 special.


Key Features of the Topcon GTL-1000

  • High-Precision Scanning: The GTL-1000 provides high-precision measurements, capturing details with incredible accuracy. This is essential for projects where even the smallest errors can lead to significant problems.
  • Dual Functionality: One of the standout features of the GTL-1000 is its ability to function as both a total station and a 3D scanner. This means users can switch between measuring angles and distances and capturing detailed 3D data without needing separate devices.
  • Fast Data Collection: The GTL-1000 can scan large areas quickly. This speed is particularly useful on construction sites where time is critical, allowing teams to gather data efficiently and move forward with their projects.
  • User-Friendly Interface: The device has an intuitive touchscreen display that makes it easy to operate. Users can navigate through settings, start scans, and view data with just a few taps, making it accessible even for those who may not be tech-savvy.
  • Portable Design: The GTL-1000 is designed to be lightweight and portable. This makes it easy for surveyors to carry it to different locations without feeling weighed down.
  • Durable Construction: Built to withstand harsh weather conditions, the GTL-1000 is rugged and reliable. This durability ensures that it can be used in various environments without compromising performance.
  • Integrated Software: The GTL-1000 comes with integrated software that allows users to process and analyze the scanned data easily. This software helps create detailed models and reports that can be used for presentations or further analysis.

Components of the GTL-1000 Kit
The Topcon GTL-1000 typically includes several key components that make it a complete scanning solution:

1. Scanning Unit
The main part of the kit, the scanning unit, contains all the technology needed to capture 3D data. It is equipped with lasers and cameras that work together to gather measurements.

2. Controller
The controller is a handheld device that allows the operator to interact with the scanning unit. It provides access to various functions, data collection, and real-time monitoring of scans.

3. Tripod
A sturdy tripod is essential for stabilizing the scanning unit during measurements. It ensures that the device remains level and secure, which is important for accurate results.

4. Accessories
The kit may also include various accessories such as:

  • Batteries: Extra batteries to ensure you can work for long periods without interruption.
  • Chargers: To keep your devices powered up and ready to use.
  • Carrying Case: A protective case for transporting the GTL-1000 safely.

Applications of the Topcon GTL-1000
The Topcon GTL-1000 is versatile and can be used in many different fields. Here are some common applications:

1. Construction
In construction, the GTL-1000 is used to create accurate models of buildings and structures. This helps architects and engineers design projects more effectively and ensures that everything is built according to the plans.

2. Land Surveying
Surveyors use the GTL-1000 to measure land and create topographic maps. This is important for determining property boundaries, assessing land for development, and creating detailed maps of areas.

3. Infrastructure Development
For projects like roads, bridges, and tunnels, the GTL-1000 provides the necessary measurements for planning and construction. Its precision helps engineers avoid errors that could lead to safety issues.

4. Historical Preservation
The GTL-1000 can be used to create 3D models of historical sites and artifacts. This helps preserve cultural heritage and allows researchers to study and analyze these important locations without causing damage.

5. Environmental Studies
Researchers use the GTL-1000 for environmental monitoring and analysis. It helps collect data on land use, vegetation, and other ecological factors, which is important for conservation efforts.


Benefits of Using the Topcon GTL-1000
The Topcon GTL-1000 offers several benefits that make it a valuable tool for professionals:

1. Enhanced Efficiency
With its fast data collection capabilities, the GTL-1000 allows surveyors to work more efficiently. This speed helps teams complete projects on time and reduces downtime on construction sites.

2. Improved Accuracy
The high precision of the GTL-1000 ensures that measurements are reliable. This accuracy is crucial for projects that require exact data, such as construction and land surveying.

3. Versatility
The GTL-1000 can be used in various applications, making it a valuable tool for many professionals. Its dual functionality allows users to switch between total station and 3D scanning modes seamlessly.

4. User-Friendly Design
The intuitive interface and touchscreen display make the GTL-1000 easy to operate. Even those who are new to 3D scanning can quickly learn how to use it, which helps reduce training time.

5. Durability
The rugged construction of the GTL-1000 ensures that it can withstand tough working conditions. This durability means that users can rely on the instrument for consistent performance in the field.


How to Use the Topcon GTL-1000
Using the Topcon GTL-1000 is straightforward. Here’s a step-by-step guide:

Step 1: Set Up the Scanning Unit
Place the scanning unit on a stable tripod in a clear area with a good view of the object or area being scanned.
Connect it to a power source and turn it on.

Step 2: Prepare the Controller
Turn on the handheld controller and connect it to the scanning unit.
Set up the controller to communicate with the scanning unit for real-time data collection.

Step 3: Start Scanning
Move to the points you want to scan. The scanning unit will capture data as you move around the area.
Follow the instructions on the controller’s display to start and stop scans.

Step 4: Analyze the Data
Once you have collected all the necessary data, you can process it using the integrated software.
This analysis will help you create 3D models, reports, or other outputs based on your scans.


Conclusion
In conclusion, the Topcon GTL-1000 Scanning is a powerful and versatile tool for professionals in surveying, construction, and environmental studies. Its advanced features, high precision, and user-friendly design make it an essential instrument for accurate data collection and efficient workflows. Whether you are measuring land, managing construction projects, or preserving historical sites, the GTL-1000 will help you achieve your goals with confidence.

Included: Topcon GTL-1000, Battery, Charger, Power cable, Stylus pen, Lens cap, Lens hood, Tool pouch, Screw driver, Lens brush, Adjusting pin, Hexagonal wrench, Silicon cloth, Quick guide, Startup guide (This sheet), SD card, USB flash drive (Manual), Serial card, Laser caution sign-board, Carrying case, Carrying strap, Export restrictions card.
$8,000.00
Used Topcon PS-103A Power Station 3" Robotic Total Station For Sale (Topcon PS-103A Power Station 3" )

Topcon PS-103A Power Station 3" Robotic Total Station

The Topcon PS-103A Power Station is an amazing tool that helps people measure distances and angles very accurately. It is a type of robotic total station, which means it can do a lot of work automatically. This device is essential for professionals like surveyors, engineers, and construction workers who need precise measurements for their projects. In this article, we will explore what the Topcon PS-103A is, how it works, its features, and why it is so important. 


What is a Total Station?
A total station is a special instrument used in surveying. It combines two important tools: a theodolite (which measures angles) and an electronic distance measuring device (EDM) (which measures how far away something is). This means that a total station can help you find out exactly where things are located on the ground.


How Does a Total Station Work?
Total stations work by using a laser to measure distances and a telescope to measure angles. The surveyor sets up the total station on a tripod, points it at a specific location, and takes measurements. The total station then calculates the exact position based on the angle and distance measured.


Introducing the Topcon PS-103A
The Topcon PS-103A is one of the best robotic total stations available today. It is designed to be very precise and easy to use. Let’s look at some of its key features and why it is a great choice for surveying and construction work.

Key Features of the Topcon PS-103A

  • High Precision Measurement: The PS-103A provides measurements with an accuracy of 3 arc seconds. This means it can measure angles very precisely, which is crucial for many surveying tasks.
  • Robotic Functionality: One of the coolest features of the PS-103A is its robotic capability. This means that the total station can automatically follow the surveyor as they move around. It uses advanced tracking technology to keep the instrument aimed at the surveyor, making it easier to take measurements without needing someone to hold the instrument in place.
  • Long-Range Communication: The PS-103A can communicate over long distances. This is especially useful on large construction sites or in open areas where surveyors need to work far away from the total station.
  • User-Friendly Interface: The instrument has a bright and clear touchscreen display. This makes it easy for users to navigate through different functions and settings, even if they are not experts in technology.
  • Durable Construction: The PS-103A is built to last. It can withstand tough weather conditions, so it can be used in rain, snow, or heat without worrying about damaging it.
  • Integrated GPS Capability: The PS-103A can work with GPS systems. This means it can combine traditional surveying methods with satellite technology to improve accuracy even further.
  • Long Battery Life: The total station has a powerful battery that lasts a long time. This allows surveyors to work in the field for hours without needing to recharge.

Components of the PS-103A Kit
The Topcon PS-103A Power Station comes with several important components that make it a complete surveying solution:

1. Total Station Unit
This is the main part of the kit. It contains all the technology needed to measure angles and distances. The total station unit is mounted on a tripod for stability.

2. Controller
The controller is a handheld device that allows the surveyor to communicate with the total station. It provides access to various functions, data collection, and real-time monitoring of measurements.

3. Tripod
A sturdy tripod is essential for holding the total station steady while taking measurements. It ensures that the instrument is level and secure, which is important for accurate results.

4. Accessories
The kit may also include various accessories such as:

  • Batteries: Extra batteries to ensure you can work for long periods without interruption.
  • Chargers: To keep your devices powered up and ready to use.
  • Carrying Case: A protective case for transporting the total station safely.

Applications of the Topcon PS-103A
The Topcon PS-103A Power Station is versatile and can be used in many different fields. Here are some common applications:

1. Land Surveying
Surveyors use the PS-103A to measure land accurately. This is important for determining property boundaries, creating maps, and assessing land for development. Accurate measurements help avoid disputes over land ownership.

2. Construction
In construction, the PS-103A is essential for laying out buildings and other structures. It ensures that everything is built in the right place and according to the plans. This helps prevent costly mistakes and delays.

3. Mining and Excavation
In mining operations, the PS-103A is used to measure and map excavation sites. It helps ensure that mining is done safely and efficiently, providing accurate data for planning and operations.

4. Infrastructure Development
For projects like roads, bridges, and tunnels, the PS-103A provides the necessary measurements for planning and construction. Its precision helps engineers avoid errors that could lead to safety issues.

5. Environmental Studies
Researchers use the PS-103A for environmental monitoring and analysis. It helps collect data on land use, vegetation, and other ecological factors, which is important for conservation efforts.


Benefits of Using the Topcon PS-103A
The Topcon PS-103A offers several benefits that make it a valuable tool for professionals:

1. Enhanced Efficiency
With its robotic functionality, the PS-103A allows surveyors to work more efficiently. The automatic tracking feature means surveyors can focus on collecting data without having to adjust the instrument constantly.

2. Improved Accuracy
The high precision of the PS-103A ensures that measurements are reliable. This accuracy is crucial for projects that require exact data, such as construction and land surveying.

3. Versatility
The PS-103A can be used in various applications, making it a valuable tool for many professionals. Its ability to integrate with GPS systems further enhances its versatility.

4. User-Friendly Design
The intuitive interface and touchscreen display make the PS-103A easy to operate. Even those who are new to total stations can quickly learn how to use it, which helps reduce training time.

5. Durability
The rugged construction of the PS-103A ensures that it can withstand tough working conditions. This durability means that users can rely on the instrument for consistent performance in the field.


How to Use the Topcon PS-103A
Using the Topcon PS-103A Power Station is relatively simple. Here’s a step-by-step guide:

Step 1: Set Up the Base Station
Place the total station on a stable tripod in a clear area with a good view of the sky.
Connect it to a power source and turn it on.
Make sure it is receiving signals from satellites.

Step 2: Prepare the Controller
Turn on the handheld controller and connect it to the total station.
Set up the controller to communicate with the total station for real-time data collection.

Step 3: Start Collecting Data
Move to the points you want to measure. The total station will automatically track you as you move.
Take measurements by following the instructions on the controller’s display.

Step 4: Analyze the Data
Once you have collected all the necessary measurements, you can analyze the data using software on your computer.
This analysis will help you create maps, reports, or other outputs based on your measurements.


Conclusion
In conclusion, the Topcon PS-103A Power Station 3" Robotic Total Station is a powerful and versatile tool for professionals in surveying, construction, mining, and environmental studies. Its advanced features, high precision, and user-friendly design make it an essential instrument for accurate data collection and efficient workflows. Whether you are measuring land, managing construction projects, or conducting research, the PS-103A will help you achieve your goals with confidence.

Included: Topcon PS-103A Power Station 3" Robotic Total Station 2.4 GHz Radio, Topcon RC-5 Remote Control, Topcon ATP 1 Prism w/ Protective Strap & QTY. 2 Rubber Caps, Topcon CDC68A Battery Charger, Lens Hood For PS-103A, Assorted Tool Kit, QTY. 5 Battery Packs, Power Cord, User Manual On CD-ROM, Hard Carrying Case (G).
$6,000.00
USED TOPCON HIPER HR GNSS BASE AND ROVER KIT FOR SALE!! (TOPCON HIPER HR GNSS BASE AND ROVER KIT)

TOPCON HIPER HR GNSS Base and Rover Kit

The TOPCON HIPER HR GNSS Base and Rover Kit is an incredible tool that helps people measure land and locations very accurately. It is widely used by surveyors, engineers, and farmers to gather important data about the Earth. In this article, we will explore what this kit is, how it works, its features, and why it is so important. 


What is GNSS?
GNSS stands for Global Navigation Satellite System. It is a system that uses satellites high above the Earth to help us know exactly where we are. Just like how your smartphone uses GPS to give you directions, GNSS provides precise location information for various applications.


How Does GNSS Work?
GNSS works by sending signals from satellites to receivers on the ground. These receivers pick up the signals and calculate their position based on the time it takes for the signals to reach them. The more satellites the receiver can connect to, the more accurate the location will be.


Introduction to the TOPCON HIPER HR
The TOPCON HIPER HR is one of the most advanced GNSS receivers available. It is designed to be used in many different environments, whether you are in a field, on a construction site, or anywhere else. Let’s take a closer look at its features!


Key Features of the TOPCON HIPER HR

  • Multi-Frequency GNSS: The HIPER HR can connect to multiple frequencies, such as L1, L2, and L5. This means it can receive signals from more satellites, making it more accurate than single-frequency receivers.
  • Real-Time Kinematic (RTK) Technology: RTK is a method that allows surveyors to get very precise measurements in real-time. With this technology, you can see results instantly, which is super helpful for making quick decisions in the field.
  • Advanced Signal Processing: The HIPER HR uses advanced algorithms to process signals. This helps maintain accuracy even in difficult environments, like crowded cities or areas with lots of trees.
  • Compact and Lightweight Design: The kit is designed to be easy to carry. It’s lightweight, so surveyors can move around without feeling weighed down.
  • User-Friendly Interface: The touchscreen display is easy to use, even for beginners. You don’t need to be a tech expert to operate it!
  • Long Battery Life: The battery lasts a long time, which means you can work in the field for hours without needing to recharge.
  • Rugged Construction: The TOPCON HIPER HR is built to withstand harsh weather conditions, ensuring durability in various terrains.

Components of the Kit
The TOPCON HIPER HR GNSS Base and Rover Kit includes several important components:

1. Base Station
The base station is a fixed unit that stays in one place. It collects data from satellites and sends correction information to the rover unit. This helps improve the accuracy of the measurements taken by the rover.

2. Rover Unit
The rover is the mobile part of the kit. Surveyors take the rover with them into the field to collect data. It receives signals from satellites and uses the information from the base station to calculate its exact position.

3. Accessories
The kit comes with various accessories, including:

  • Antennas: These help improve signal reception.
  • Batteries: Extra batteries ensure you won’t run out of power while working.
  • Chargers: Keep your devices charged and ready to go.
  • Mounting Hardware: Helps attach the equipment securely.

Applications of the TOPCON HIPER HR
The TOPCON HIPER HR GNSS Base and Rover Kit is used in many different fields. Here are some of the most common applications:

1. Land Surveying
Surveyors use the HIPER HR to measure land accurately. This is important for determining property boundaries, planning construction projects, and creating maps. Accurate measurements help avoid disputes over land ownership and ensure that buildings are constructed in the right place.

2. Construction
In construction, having accurate measurements is crucial. The HIPER HR helps builders ensure that structures are built in the right location and according to specifications. This prevents costly mistakes and delays.

3. Agriculture
Farmers use the TOPCON HIPER HR for precision farming. This means they can measure their fields accurately to make better decisions about planting, watering, and harvesting crops. This technology helps increase crop yields and reduces waste.

4. Mapping
The kit is also used for mapping. It helps create detailed maps of areas, which can be used for various purposes, including urban planning and environmental studies. Accurate maps are essential for understanding land use and planning future developments.

5. Environmental Monitoring
Researchers use the HIPER HR to study the environment. It helps them gather data on land use, natural resources, and changes in the landscape over time. This information is vital for conservation efforts and understanding the impacts of climate change.


Why is the TOPCON HIPER HR Important?
The TOPCON HIPER HR GNSS Base and Rover Kit is important for several reasons:

1. Accuracy
The accuracy of the measurements provided by the HIPER HR is unmatched. This is essential for any work that requires precise data, such as surveying and construction.

2. Efficiency
With real-time data, surveyors can make quick decisions. This saves time and reduces the chances of errors in their work. Efficiency is crucial in fields where time is money.

3. Versatility
The kit can be used in various fields, making it a valuable tool for many professionals. Whether in agriculture, construction, or environmental research, the HIPER HR is adaptable to different needs.

4. User-Friendly
Even if you are new to surveying or GNSS technology, the HIPER HR is designed to be easy to use. This makes it accessible to a wider range of users.


How to Use the TOPCON HIPER HR
Using the TOPCON HIPER HR GNSS Base and Rover Kit is straightforward. Here’s a simple guide:

Step 1: Set Up the Base Station
Place the base station in a fixed location with a clear view of the sky.
Connect it to a power source and turn it on.
Make sure it is receiving signals from satellites.

Step 2: Prepare the Rover Unit
Take the rover unit to the area where you want to collect data.
Turn it on and connect it to the base station for corrections.
Ensure it is receiving satellite signals.

Step 3: Start Collecting Data
Move the rover to different points in the area you want to survey.
The rover will display real-time measurements on its screen.
Record the data as needed for your project.

Step 4: Analyze the Data
Once you have collected all the necessary data, you can analyze it using software on your computer.
This will help you create maps, reports, or other outputs based on your measurements.


Conclusion
In summary, the TOPCON HIPER HR GNSS Base and Rover Kit is a powerful tool that helps surveyors, engineers, and farmers measure land accurately. With its advanced features, user-friendly design, and versatility, it is a must-have for anyone working in fields that require precise measurements. Whether you are mapping land, planning a construction project, or optimizing agricultural practices, the HIPER HR will help you get the job done efficiently and accurately.

The TOPCON HIPER HR GNSS Base and Rover Kit is a powerful and versatile tool for professionals in surveying, construction, agriculture, and environmental monitoring. Its advanced features, user-friendly design, and exceptional accuracy make it an essential asset for anyone needing precise location data. Whether you are mapping land, planning a construction project, or optimizing agricultural practices, the HIPER HR will help you achieve your goals efficiently and accurately.
$3,300.00
USED TOPCON HIPER V GNSS BASE AND ROVER KIT FOR SALE!! (TOPCON HIPER V GNSS BASE AND ROVER KIT)

TOPCON HIPER V GNSS Base and Rover Kit

The TOPCON HIPER V GNSS Base and Rover Kit is an amazing tool used by surveyors and engineers to measure land accurately. This kit helps in understanding the exact location of places on Earth. In this article, we will explore what this kit is, how it works, and why it is so important. We will break it down into easy-to-understand sections!


What is GNSS?
GNSS stands for Global Navigation Satellite System. It is a system that uses satellites in space to help us know where we are on Earth. Just like how your phone uses GPS to help you find your way, GNSS is used for more precise measurements in various fields.


How Does GNSS Work?
GNSS works by sending signals from satellites to receivers on the ground. The receiver picks up these signals and calculates its position based on the time it took for the signals to arrive. The more satellites the receiver can connect to, the more accurate the position will be.


Introducing the TOPCON HIPER V
The TOPCON HIPER V is one of the best GNSS receivers available. It is designed to be used in different environments, whether you are in a field, on a construction site, or anywhere else. Let’s look at its features!


Key Features of the TOPCON HIPER V

  • Dual-Frequency GNSS: The HIPER V can connect to both L1 and L2 frequency signals. This means it can receive signals from more satellites, which helps improve accuracy.
  • Real-Time Kinematic (RTK): RTK is a method that allows surveyors to get very precise measurements in real-time. This means you can see the results instantly, which is super helpful for making quick decisions.
  • Compact and Lightweight: The kit is designed to be easy to carry. It’s lightweight, so surveyors can move around without feeling weighed down.
  • User-Friendly Interface: The touchscreen display is easy to use, even for beginners. You don’t need to be a tech expert to operate it!
  • Long Battery Life: The battery lasts a long time, which means you can work in the field for hours without needing to recharge.
  • Durable Design: The TOPCON HIPER V is built to last. It can withstand tough weather conditions, making it perfect for outdoor use.

What’s in the Kit?
The TOPCON HIPER V GNSS Base and Rover Kit includes several important components:

1. Base Station
The base station is a fixed unit that stays in one place. It collects data from satellites and sends correction information to the rover unit. This helps improve the accuracy of the measurements taken by the rover.

2. Rover Unit
The rover is the mobile part of the kit. Surveyors take the rover with them into the field to collect data. It receives signals from satellites and uses the information from the base station to calculate its exact position.

3. Accessories
The kit comes with various accessories, including:

  • Antennas: These help improve signal reception.
  • Batteries: Extra batteries ensure you won’t run out of power while working.
  • Chargers: Keep your devices charged and ready to go.
  • Mounting Hardware: Helps attach the equipment securely.

Applications of the TOPCON HIPER V
The TOPCON HIPER V GNSS Base and Rover Kit is used in many different fields. Here are some of the most common applications:

1. Land Surveying
Surveyors use the HIPER V to measure land accurately. This is important for determining property boundaries, planning construction projects, and creating maps.

2. Mapping
The kit is also used for mapping. It helps create detailed maps of areas, which can be used for various purposes, including urban planning and environmental studies.

3. Agriculture
Farmers use the TOPCON HIPER V for precision farming. This means they can measure their fields accurately to make better decisions about planting, watering, and harvesting crops.

4. Construction
In construction, having accurate measurements is crucial. The HIPER V helps builders ensure that structures are built in the right place and to the correct specifications.

5. Environmental Studies
Researchers use this kit to study the environment. It helps them gather data on land use, natural resources, and changes in the landscape over time.


Why is the TOPCON HIPER V Important?
The TOPCON HIPER V GNSS Base and Rover Kit is important for several reasons:

1. Accuracy
The accuracy of the measurements provided by the HIPER V is unmatched. This is essential for any work that requires precise data, such as surveying and construction.

2. Efficiency
With real-time data, surveyors can make quick decisions. This saves time and reduces the chances of errors in their work.

3. Versatility
The kit can be used in various fields, making it a valuable tool for many professionals. Whether in agriculture, construction, or environmental research, the HIPER V is adaptable to different needs.

4. User-Friendly
Even if you are new to surveying or GNSS technology, the HIPER V is designed to be easy to use. This makes it accessible to a wider range of users.


Conclusion
In summary, the TOPCON HIPER V GNSS Base and Rover Kit is a powerful tool that helps surveyors, engineers, and farmers measure land accurately. With its advanced features, user-friendly design, and versatility, it is a must-have for anyone working in fields that require precise measurements. Whether you are mapping land, planning construction, or studying the environment, the HIPER V will help you get the job done efficiently and accurately.

Included: 2x Topcon HiPer V Integrated Receiver Dual GD Digital UHF II 440-470 Base Rover Glonass,  4x Li-Ion Batteries, 1x CD Manual, 1x Topcon Assy, 2x Power Receiver to SAE Cable, 2x EDC113B 115VAC Power Cable for BDC 68/70 Li-Ion Battery, 1x 3M Measuring Tape, 2x UHF 450-470 Male BNC Antenna, 1x Tribrach with Optical Plummet, 1x Plug Adapter, 1x Tribrach Adapter Model -S2, 1x GPS Software CD, Carry Case.
$1,900.00
Per Page      1 - 11 of 11
  • 1